How To Make A Diy Liquor Dispenser?

This post may contain affiliate links. I may receive a small commission at no extra cost to you. All opinions remain my own.

Having alcohol on hand is essential for all social gatherings, but there can be instances when it’s difficult to source it while entertaining guests.

If you want to avoid running out of alcohol, you can build a DIY liquor dispenser that will keep the drink flowing.

What are the steps to make a DIY liquor dispenser?

The process for making a DIY liquor dispenser varies depending on what type of liquor you choose to use.

Some require more work than others, so you’ll need to research which types of liquors are easiest to mix with other materials and then follow the directions accordingly.

For example, if you plan to make a whiskey dispenser, you can buy a plastic or stainless steel bottle for the base, and fill it with water.

You can then add an equal amount of grain alcohol, such as Everclear or Everfresh, and stir until the mixture has been thoroughly combined.

Once the liquid and ingredients have set, pour in any remaining grain alcohol into the bottle and seal up the top.

If you plan to make a rum dispenser, you’ll need to start by filling a container with sugar.

Add some rum to this solution, and stir until evenly mixed.

Pour this mixture into a second container with a lid, and place both containers inside a larger container with a spout attached.

When you’re ready to serve up a cocktail, simply remove the lid from one of the smaller containers, and pour rum over the top.

Once you’ve mastered these basics, you can move onto other combinations of liquor and water, such as gin and tonic, vodka and cola, or tequila and orange juice.

Of course, you should always check with your local laws before making homemade liqueurs.

How To Make A Diy Liquor Dispenser

What supplies do you need to make a DIY liquor dispenser?

  • Plastic or stainless steel bottles (preferably at least 8 ounces)
  • Mason jars
  • Drinking glasses
  • A funnel
  • Alcohol of choice (grain alcohol is usually recommended)
  • Sugar
  • Lid for each jar
  • Spoon or ladle
  • Towel
  • Parchment paper
  • Cookie sheet
  • Scissors
  • Gloves

What is the best type of liquor to use in a DIY dispenser?

You can use just about any type of liquor in a DIY liquor dispenser, though you may find that certain types of liquor don’t mix well with other ingredients.

For instance, many liquors contain high amounts of sugar, such as rum or whiskey, so they won’t easily mix with other kinds of alcohol.

Other types of liquor, like brandy, can also be difficult to combine with other ingredients.

When choosing a type of liquor for your DIY liquor dispenser, try to stick to ones that aren’t overly sweet, because these liquids tend to separate from other types of liquor faster.

In addition, you might want to avoid brands that are too strong, since these liquors can overwhelm other ingredients in your dispenser.

How do you make sure your DIY liquor dispenser doesn’t leak?

To ensure that your DIY liquor dispenser stays tight during storage, you should seal it tightly after mixing all the components together.

After pouring the liquid ingredients into the first container, make sure to wrap the entire thing in aluminum foil before sealing it up with tape or glue.

In addition to sealing the outside of the dispenser, you should also make sure to cover the opening of the glass with either parchment paper or aluminum foil.

This will help prevent spillage while still allowing people to see the contents of the dispenser.

What are some creative ways to decorate your DIY liquor dispenser?

Your DIY liquor dispenser can come in a variety of colors and styles, so you can create something unique for your event.

You can even create decorative labels for the bottles to give them a professional look.

Before you begin, measure your bottles and cut them down to size with a pair of scissors.

Next, apply a thin layer of glue to the bottle bottoms, and press them firmly into the center of the cookie sheet.

Let the glue dry completely before adding labels.

After gluing the bottles to the cookie sheet, you’ll need to carefully position the labels on top of the bottles.

Try not to twist the bottles themselves, so that they stay intact when the label is added.

To attach the labels, you can either use hot glue or double-sided tape.

Both options will allow you to use an adhesive gun to apply pressure to the back side of the labels to secure them to the bottles.

How do you make sure your DIY liquor dispenser works properly?

To test that your DIY liquor dispenser is working correctly, try pouring a small amount of your chosen liquor into the large container.

If the liquid flows through the spout, the dispenser is working well.

However, if the liquid stops flowing within a few seconds, there may be a problem with the dispenser, so you’ll want to fix it before serving anyone drinks.

How To Make A Diy Liquor Dispenser? 3

What are some tips for using a DIY liquor dispenser?

To avoid spills, you should always hold the dispenser away from yourself when pouring.

In addition, you’ll want to make sure you’re wearing gloves whenever you’re handling the dispenser.

These items are easy to contaminate with bacteria, so it’s important to be extra careful around them.

Keep the dispenser in a cool area, such as a refrigerator, to prevent condensation from forming on the inside of the dispenser.

The condensation could cause mold growth, so you’ll want to wipe it off periodically to maintain the freshness of the dispenser.

How do you clean a DIY liquor dispenser?

Like most kitchen tools, you should take care of your DIY liquor dispenser regularly.

Before cleaning, you should rinse off the dispenser and its parts thoroughly with warm water and soap.

Then, you should let everything dry completely before storing it away again.

After drying the dispenser, you can wipe it down with a damp cloth.

Where can I purchase supplies to make a DIY liquor dispenser?

You can find most of the items needed to make a DIY liquor dispenser on Amazon.com or other online retailers, including:

Plastic or stainless steel bottles

Mason jars

Drinking glasses

Funnel

Alcohol of choice (grain alcohol is usually recommended)

Sugar

Lid for each jar

Spoon or ladle

Towel

Parchment paper

Cookie sheet

Scissors

Gloves

Adhesive gun

With a little bit of effort, you can turn a boring old bottle rack into a
beautiful piece of art.

While you’re at it, why not add a touch of flair to your home bar by
building a stylish liquor cabinet?

And if you’re lucky enough to live near a lumberyard, you can make
your own whiskey barrel instead.


Latest posts by Grace Lambert (see all)

Leave a Comment

Previous

Types Of Oatmeal?

Mocha Vs Latte Vs Cappuccino?

Next